Forum: 74 to 78

We wana know if there is anywere in the uk or usa that we can get patent or copy parts i.e body-panels e.c.t

Virgin territory!! Not anymore!!!

Has anyone replaced their heater core on a RHD converted II? Mine seems to be leaking but it looks like I'd need to remove both accel and brake pedals to get it out and even then it might not squeeze past the steering box. Has anyone done this and perhaps has some advice? Cheers, Matt.

I have a 1977 Mustang II Ghia V8 and I've noticed that the basic ignition timing on cat equipped California cars was 12deg BTDC but just 6deg BTDC in the 49 states where they didn't fit cats in '77. I think this was to keep NOx emissions low so presumably it would run better at 12deg and this...

Hi guys, I got some bits for mine from this 77 ghia.- Really nice guy called Dave, his number is 07903 291825. It's in Wetherby. The engine is gone, and I had the weatherstripping, rear view mirror and some chrome.

Looks like one for you II owners :) appears to be wrongly listed as 73:( http://www.mocgb.net/forums/showthread.php?t=31139

Hi everyone, I have a broken anti roll bar link, I've got a new one but I can't get the old one off! The nut came off okay but the bolt wont pull out of the housing on the lower arm, I gave it some brute force and the housing started to bend! It all turns freely so I guess it cant be...

Hi all! What are the right spark plugs for a '76 vintage 302 motor please? Plan on getting some new plugs, wires and a distributor cap and want to know what plugs to get. Motor is standard as far as I can tell. Thanks , Nick :)

Long story short I got my new Brake Booster fitted, thing is it's way too sensative. There's about an inch of free play then the brakes are on/off rear end locks up almost straight away. Is there anyway I can fix this issue? so it's more gradual braking depending on the pressure applied...

I have bought a new (re-con) booster and master cylinder from RockAuto, wondered if anyone can advise a descent garage to take it to, to swap it out for me. I was going to take it to Clough Street Garage (near B&Q in Roth/ next to Bulldog auto parts) I don't touch brakes and hydraulics :( any...

Hi all, I'm not sure how technical this is, but I thought I'd blow some cobwebs off this area of the site. :p Does anyone know if 'another' fuel tank would fit my '74. Mine has worn thin to the point of springing a leak when the car was being cleaned off underneath.:eek: I may be able to...

Help!! I'm trying to replace all four ball joints on my (what I've been told) is a MK2 front clip. I've sourced new items, but they are much bigger and are three stud fitment whereas the originals are 3/4 of the size and are four stud fitment. I've double-checked with the supplier and they confirm...

Hi all, I've got a shudder through the steering wheel on my series II. It happens when going straight & not breaking, but isn't consistently bad. It varies form not very noticable, to like holding a road drill. :eek: It also pulls a bit to the left, especially when braking. I took it to a...