Announcement

Collapse
No announcement yet.

Pump to carb fuel line - edelbrock

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Pump to carb fuel line - edelbrock

    i have a 289, standard mechanical fuel pump and edelbrock 4 pot carb. It currently has a nice rubber pipe from the carb to an inline filter and then a bit more rubber pipe onto the end of the standard metal pipe to the pump. I am not keen on this and would prefer a metal pipe. Any suggestions as I can see off the shelf pipes for a holly carb but not a edelbrock. Any help for a beginner is appreciated.

    #2
    One way would be to get a workshop or engineer to bend one using copper tubing and a flaring tool and a mini pipe bender. Caravan supplies usually have the right diameter pipe. Cheap brake pipe tool will get you the flares. Good to be safety conscious.

    Cheers
    Eddie

    Comment

    Working...
    X