Announcement

Collapse
No announcement yet.

Blower fan cage removal!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Blower fan cage removal!!

    Hi
    Just stripped down my heater and it needs a little tlc
    the blower cage has gone a little rusty and Iíd like to remove it to spray it up etc, but it wonít budge Iíve removed the grub screw and soaked it to death in wd40 but itís stuck solid.

    any advice or experience gladly received

    cheers

    #2
    I answered some of this on your restoration post about lubricating the motor bushes.The fan is totally hidden in the heater so I would wire brush it as best I could and rattle can it. You could try a little heat direct on the fan bush.
    Allan

    Comment


      #3
      Yeah I did think about heating it up Iíll give it a whirl and if itís solid then Iíll just spruce her up as best I can

      cheers

      Comment

      Working...
      X