Announcement

Collapse
No announcement yet.

Power steering pump thread size

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Power steering pump thread size

    Does anyone know the thread size of the high pressure fitting that is on the back of a standard 68 Mustang power steering pump.

    It measures 5/8 and is 18 tpi but it is most likely a hydraulic fitting size.

    Cheers, Ron



    www.stsimports.co.uk
    www.classicamericancarsales.co.uk

    #2
    Looks like it's 3/8 SAE Flare. Anyone confirm?

    Cheers, Ron


    www.stsimports.co.uk
    www.classicamericancarsales.co.uk

    Comment


      #3
      I think it's a standard hyd size, as you say. Our local hydraulics place made me up some new pipes a few years back with no issues.

      Comment


        #4
        Taken from Gates PAS high pressure line product information......

        1967-70 Mustang power steering hose kit has a pressure line for inverted flare fittings. Large female inverted flare is 5/8 x 18 IFF and the smaller end is x 20 inverted flare male. There is also an adapter to reduce the smaller end from x 20 to 3/8 x 24 IFM.
        • End (1) type: Male inverted flare
        • End (2) type: Female SAE
        • End (1) Diameter: .3125"
        • End (2) Diameter: .375"
        • Length: 20.125"

        Comment

        Working...
        X