User Profile

[stevec2004]

More like a horse's arse!...

[stevec2004]

Is it April 1st

[stevec2004]

The only way to tell if it's a 302 or 351 is either measure the stroke or like I said earlier is take off the sump pan as the Aussie 302 cranks have it stamped in big numbers on it.351 is 5.7L 302 is 5.0L.The Clevelands are a fairly wide engine when compared to the Windsor family.They fit well in a...

[stevec2004]

Found the site that will decode the first bit https://www.uniquecarsandparts.com.a...identification

[stevec2004]

Have you got any better photos? It does look like an Aussie Cleveland engine with a C6 gearbox.If you have a look on the block on the front right hand side of the block there is usually some numbers and letters,post them on here and I'm sure someone will decode them for you.If you pull the sump pan...

[stevec2004]

Okay if you just want to plod around and look good at shows but useless if you need the car to handle well or stop quickly at any reasonable speed,just my opinion after a few past issues....

[stevec2004]

Hopefully you can view this without being logged into Facebook,my photos from Friday https://www.facebook.com/steve.charl...2966950&type=3

[stevec2004]

I use 225/60-15 on all of my cars,modern European spec tyres rather than the US wider,white lettered stuff that lasts forever but handle like crap and multiply your emergency braking about tenfold!

[stevec2004]

I expect they mean they've changed the valve stem attached to the sensor itself.You certainly won't be getting the TPMS sensor itself fitted and supplied for £6!

[stevec2004]

Have you got Halogens fitted David or the old sealed beam units? If Halogens are they running through a relay rather than full power through the switch.It might even be worthwhile fitting relays if sealed beam units are fitted so as not to put full load through the old switch and wiring.

[stevec2004]

This is what we have at work,I said it wouldn't be cheap! https://www.ebay.co.uk/itm/ATEQ-VT56...I/292151825124...

[stevec2004]

I would have thought there is a difference in length depending on whether it's a case fill or pan fill C4....